Electrophoresis - Color Icons2

Electrophoresis

AccuGel 29:1 (30%)

$72.00$125.00

Quantity Discount when you buy 4 or more 1 Liter Bottles

Catalog number: EC-851

  • 29:1 Acrylamide to Bisacrylamide Stabilized Solution
  • Consistently Crystal Clear Gels
  • Aldehyde and Acrylic Acid Free
  • Certified RNase and DNase Free
  • Stabilized for Long Shelf Life
  • Formulated with 18 MegOhm Water, 0.2 Micron Filtration

Description

Quantity Discount when you buy 4 or more 1 Liter Bottles

Catalog number: EC-851

  • 29:1 Acrylamide to Bisacrylamide Stabilized Solution
  • Consistently Crystal Clear Gels
  • Aldehyde and Acrylic Acid Free
  • Certified RNase and DNase Free
  • Stabilized for Long Shelf Life
  • Formulated with 18 MegOhm Water, 0.2 Micron Filtration

Reliable

AccuGel 29:1 is a stabilized, ready-to-use solution of 30% (w/v) acrylamide : bisacrylamide(29:1). AccuGel 29:1 has zero acrylic acid content, eliminating the fixed charges that cause band streaking. Additionally, oxidation products such as aldehydes have been removed by a selective adsorption process. With AccuGel 29:1, you can trust that your results will be consistent from one electrophoretic run to the next.

Improved Safety

AccuGel 29:1 reduces exposure to neurotoxic acrylamide dust by eliminating the need for handling and weighing solid acrylamide and methylene bisacrylamide, which often leads to airborn particulate that can be readily inhaled. For your protection, AccuGel 29:1 is supplied in PVC coated shatter-proof bottles.

Stable and Pure

AccuGel 29:1 is stable for 24 months when stored tightly capped in a dark area at room temperature.

Additional information

Weight 2.5 lbs
Dimensions 7 × 7 × 14 in

Protocol

Download Full Protocol PDF >

Mix Gel Solution:
Calculate how much AccuGel you need to make your gels by using the formulas below. Bring up to the desired final volume with your usual buffers and distilled water. Pour the solution into an Erlenmeyer flask with a side-arm. In most cases, AccuGel will gel without degassing. However, for optimum reproducibility, add a stirring bar to the solution and stopper the flask. Degas the solution under a vacuum for 5 minutes while stirring on a magnetic stirrer.

VA30 = (X) (Vt)/30 for 30% AccuGel
or
VA40 =(X) (Vt)/40 for 40% AccuGel

where:
Vt = Total volume of gel casting (solution desired (ml))
VA30 = Volume of 30% AccuGel to be used (ml)
OR
VA40 = Volume of 40% AccuGel to be used (ml)
Initiate and Cast Gel:
Add 1.0ml of 10% (w/v) FRESHLY PREPARED ammonium persulfate for every 100ml of gel casting solution. Swirl gently to mix. Add 100 microliters of TEMED for every 100ml of gel casting solution. Swirl gently to mix. Pour the solution into the gel casting cassette. The gel should begin to set in 10-20 minutes. Polymerization should be permitted to continue for a minimum of 1.5-2 hours before gel is run. NOTE: After two hours of polymerization wrap each end of the gel cassette with clear plastic wrap. This is important to keep the ends of the gel from drying and to maintain sample well integrity. Appropriately wrapped gels may be stored for up to 48 hours.

Catalog Number:
EC-849
EC-850
EC-851
EC-852

Safety Overview

Safety Summary (see MSDS for complete information before using product):

EMERGENCY OVERVIEW – IMMEDIATE HAZARD
CHRONIC TOXICITY HAZARD. ACRYLAMIDE MAY CAUSE NERVOUS SYSTEM DAMAGE. ACRYLAMIDE CAUSED CANCER AND MALE REPRODUCTIVE DISORDERS IN LABORATORY ANIMAL TESTS. RISK DEPENDS ON DURATION AND LEVEL OF EXPOSURE.

Full MSDS Protocols

Download Full MSDS Protocols >